IBM 9077 manual Endefnode Command, New Commands User Executable

The enadmin command is used to change the administrative state of a dependent node in the GRF; it has the following characteristics:

•It is part of the ssp.spmgr fileset.

•It must only be executed on the Control Workstation.

•It can only be executed by the root user.

•The -r option from endefnode and endefadapter triggers enadmin -a reconfigure, while the -r option from enrmnode triggers enadmin -a reset.

•The return code is 0 if successful, 1 if failed.

Table 6 shows the list of commands from the second group (executable by any user on any standard node):

Table 6. New Commands (User Executable)

Command	Description
splstnodes	List SP nodes
splstadapters	List SP adapter

These commands have the following characteristics:

•They are part of the ssp.basic fileset.

•They can be executed on any standard RS/6000 SP node.

•They can be executed by any user.

•They only affect the current active partition unless the -Goption is used.

The following sections describe the commands in more detail.

2.4.2.1 The endefnode Command

The endefnode command can be executed using smit. The fast path for smit is enter_extnode. This command is used to add or change an extension node in the SDR DependentNode class. Its options are shown in Table 7 on page 45.

44IBM 9077 SP Switch Router: Get Connected to the SP Switch