The attributes of the DependentNode class are described in detail as follows:
AttributeDescription
node_numberThis
extension_node_identifierThis is a
reliable_hostnameThe hostname of the administrative Ethernet, de0, is the GRF’s hostname. Use the long version of the hostname when DNS is used.
management_agent_hostnameThis attribute is the hostname of the SNMP agent for the GRF. For the GRF dependent node, this is the same as the reliable_hostname.
snmp_community_nameThis field contains the SNMP community name that the SP Extension Node SNMP Manager and the GRF’s SNMP Agent will send in the corresponding field of the SNMP messages. This value must match the value specified in the /etc/snmpd.conf file. If left blank, a default name found in the SP Switch Router Adapter documentation is used.
The following attributes are derived by the RS/6000 SP system when the SDR_config routine of endefnode is invoked.
AttributeDescription
switch_node_numberThe switch port that the dependent node is attached to.
switch_numberThe switch board that the dependent node is attached to. switch_chipThe switch chip that the dependent node is attached to.
switch_chip_portThe switch chip port that the dependent node is attached to.
switch_partition_numberThe partition number to which the dependent node belongs.
Router Node 41
