/root netstat |
|
|
|
|
|
| ||
Name | Mtu | Network | Address | Ipkts Ierrs | Opkts Oerrs | Coll | ||
de0 | 1500 | <link1> | 00:c0:80:96:38:68 | 10290 | 0 | 42228 | 0 | 182 |
de0 | 1500 | <Bridge> | 00:c0:80:96:38:68 | 10290 | 0 | 42228 | 0 | 182 |
de0 | 1500 | 192.168.4 | 192.168.4.4 | 10290 | 0 | 42228 | 0 | 182 |
rmb0 | 616 | <link2> | 00:00:00:00:00:00 | 170556 | 74 | 41439 | 0 | 0 |
rmb0 | 616 | <GRIT> | 0:0x40:0 | 170556 | 74 | 41439 | 0 | 0 |
lo0 | 1536 | <link3> |
| 8387 | 0 | 8387 | 0 | 0 |
lo0 | 1536 | 127 | 127.0.0.1 | 8387 | 0 | 8387 | 0 | 0 |
lo0 | 1536 | <GRIT> | 0:0x48:0 | 8387 | 0 | 8387 | 0 | 0 |
gf000 | 4352 | <link10> | 00:c0:80:89:2d:f2 | 19 | 0 | 20 | 0 | 0 |
gf000 | 4352 | 10.2.1/24 | 10.2.1.15 | 19 | 0 | 20 | 0 | 0 |
gf001 | 4352 | <link20> | 00:c0:80:89:2d:f3 | 12 | 0 | 12 | 0 | 0 |
gf001 | 4352 | 10.3.1/24 | 10.3.1.16 | 12 | 0 | 12 | 0 | 0 |
gf002 | 4352 | <link11> | 00:c0:80:89:2d:f4 | 13 | 0 | 13 | 0 | 0 |
gf002 | 4352 | 10.4.1/24 | 10.4.1.17 | 13 | 0 | 13 | 0 | 0 |
gf003 | 4352 | <link12> | 00:c0:80:89:2d:f5 | 13 | 0 | 19 | 0 | 0 |
gf003 | 4352 | 10.5.1/24 | 10.5.1.18 | 13 | 0 | 19 | 0 | 0 |
7.On the CWS of SP21, check if the SP Switch Router Adapter card is configured. To perform this check, look if the SP Switch Router Adapter card shows up green in perspectives or enter SDRGetObjects switch_responds. Use Eunfence if needed.
8.Issue some ping commands to check the connection:
On the chosen SP21 nodes, ping all four FDDI interfaces of the nodes in SP2, for example:
root@sp21n01:/ ping 10.2.1.12
PING 10.2.1.12: (10.2.1.12): 56 data bytes
64 bytes from 10.2.1.12: icmp_seq=0 ttl=254 time=10 ms
64 bytes from 10.2.1.12: icmp_seq=1 ttl=254 time=1 ms ^C
2 packets transmitted, 2 packets received, 0% packet loss
On node
root@sp2n12:/ ping 192.168.14.1
PING 192.168.14.1: (192.168.14.1): 56 data bytes
64 bytes from 192.168.14.1: icmp_seq=0 ttl=254 time=1 ms
64 bytes from 192.168.14.1: icmp_seq=1 ttl=254 time=1 ms ^C
2 packets transmitted, 2 packets received, 0% packet loss
