Lenovo S9E, S10E manual Troubleshooting Display problems, Solution

Troubleshooting

Display problems

Problem: When I turn on the machine, nothing appears on the screen.

Solution:

1.Make sure that:

vThe battery is installed correctly.

vThe AC adapter is connected to the computer and the power cord is plugged into a working electrical outlet.

vThe computer is turned on. (Turn the power button on again for confirmation.)

2.If a user password is set:

a. Press any key to display the prompt for the user password. If the brightness level of the screen is low, increase it by pressing the Fn + ↑.

b. Type the correct password and press Enter.

3.If these items are set properly, and the screen remains blank, have the computer serviced.

Problem: When I turn on the computer, only a white cursor appears on a blank screen.

Solution: Restore the entire contents of your hard disk to the original factory contents using Product Recovery Program. If you still see only the cursor on the screen, have the computer serviced.

Chapter 4. Troubleshooting 47