Lenovo S9E, S10E manual Replacing memory, To install an SO-DIMM

Replacing memory

Important:

See Chapter 7, “Safety, use, and care information,” on page 83 before replacing memory.

Increasing memory capacity is an effective way to make programs run faster. You can increase the amount of memory in your computer by installing a double data rate two (DDR2) synchronous dynamic random access memory (DRAM) unbuffered small outline dual inline memory module (SO-DIMM), available as an option, in the memory slot of your computer. SO-DIMMs with different capacities are available.

Note:

Use only the memory types supported by your computer.

To install an SO-DIMM

1.Touch a metal table or a grounded metal object. This action reduces any static electricity in your body, which could damage the SO-DIMM. Do not touch the contact edge of the SO-DIMM.

2.Turn off the computer; then disconnect the AC adapter and all cables from the computer.

3.Close the computer display, and turn the computer over.

4.Remove the battery.

Chapter 5. Upgrading and replacing devices 71