![](/images/new-backgrounds/1187283/187283113x1.webp)
SNMP
The LevelOne Printer Server supports SNMP (Simple Network Management Protocol). This allows network supervisors to monitor and control the LevelOne Printer Server using network management platforms such as HP OpenView, IBM SystemView, etc.
The appropriate MIB file must be imported into your SNMP management program using the
Mib1p.mib | Single port models. |
Mib2p.mib | Models with 2 parallel ports |
Mib2p1s.mib | Two parallel ports, 1 serial port model. |
Mib3p.mib | Models with 3 parallel ports |
Configuring the LevelOne Printer Server for SNMP
Before using a SNMP Management station to manage the LevelOne Printer Server, the following settings should be assigned to it, in addition to the IP Address, Gateway Address, and Subnet Mas k.
SNMP Settings
SysContact | Text Field - Name of the contact person. |
SysLocation | Text Field - Location of the contact person. |
Management Station | Up to 4 Management Stations can be entered. |
IP Address(s) |
|
Trap Receiving | Up to 4 Trap Receiving Stations can be entered. |
IP Address(s) |
|
Management Station Settings
For each Management Station, the following fields are available:
Access Permission | Options are: |
| Read Only |
| Read/Write |
| Not Accessible |
Community String | Leaving this blank will disable management by this station. |
Trap Receiving Station Settings
For each Trap Receiving Station, the following fields are available:
Community String | Leaving this blank will disable management by this station. |
Trap Enable | Use this option to Enable/Disable Trap Receiving by this |
| station. |
Trap Severity | In this version, all traps are level 1. |
| Page 54 |