Windows 2000 Server
1.Start the Add Printer Wizard, select Network Printer, then click Next to browse for the LevelOne Printer Server.
2.Locate and double
The following message will be displayed:
Figure 27: Windows 2000 Message
3.Click "OK", and select the correct Manufacturer and Model for this printer.
4.Follow the prompts to complete the installation.
5.In the Printers folder,
∙Select "Shared As:" and enter an appropriate name for this printer. Users will see this name when browsing for the printer during installation.
∙If desired, click "Additional Drivers" and install printer drivers for other versions of Windows, such as Windows 98. This will assist users during the installation process.
6.Click OK to close this Window. Configuration is now complete.
Client PCs can now be configured as described in Chapter 4 - Client Configuration.
Novell NetWare
The LevelOne Printer Server fully supports both Bindery and NDS Novell systems.
With either Bindery or NDS, two (2) NetWare operating modes are possible - LevelOne Printer Server and Remote Printer. LevelOne Printer Server mode is recommended.
Novell Distributed Printing Services (NDPS) under NetWare 5 is also supported.
Configuration Methods (Bindery or NDS)
The following configuration methods are available. In each case, you must be logged into the required NetWare Server with ADMIN rights.
Also, if using Windows, Novell's Client32 should be installed on your PC. Without Client32, only limited configuration changes can be made on the NetWare Server.
Setup Wizard
Using the Setup Wizard is recommended. This allows configuration of the LevelOne Printer Server in NetWare LevelOne Printer Server Mode, which is the recommended system.
Page 73
