Wireless Configuration
Models WPS-0100 & WPS-0100USB
The
∙802.11 Ad Hoc mode - no Access Point is used, Wireless stations communicate directly with each other. This is the current standard.
∙Ad Hoc mode - no Access Point is used, Wireless stations communicate directly with each other. This is the older standard.
Of the two (2)
∙Infrastructure (Default) - all Wireless stations connect to the Access Point. This allows connection to both other Wireless stations and the wired LAN.
The
In "Infrastructure" mode, connecting a LAN cable will disable the Wireless interface.
To use the LAN interface,
Required configuration
|
| Infrastructure Mode | |
|
|
|
|
SSID | Must match the other Wireless stations, | Must match the Access Point. | |
| unless the SSID is null or "any". |
|
|
| If its SSID is null or "any", a Wireless |
|
|
| station can join any |
|
|
| But since the |
|
|
| 0100USB are fixed devices (rather than |
|
|
| roaming), their SSID should not be |
|
|
| null or "any". |
|
|
| It's recommended to assign value to |
|
|
| SSID for |
|
|
| 0100USB. |
|
|
|
|
|
|
Channel | Should match the other Wireless | Access Point sets the Channel | |
| stations. | used. | |
| However, when joining an existing ad- | Wireless stations | |
| hoc group, a Wireless station must use | automatically locate the | |
| the Channel in use, rather than its own | correct channel. | |
| Channel. |
|
|
| For a device like the |
|
|
|
|
| |
| is best to set them to the Channel |
|
|
| providing the least interference and |
|
|
| best performance. |
|
|
|
| Page 55 | |
