LevelOne WPS 0100 manual Configuration Data, BiAdmin, Other Methods, Novell Remote Printer Mode

BiAdmin

For more control and flexibility, or to use NetWare Remote Printer Mode, you can use the supplied BiAdmin management utility. Provided you have Novell's Client 32 installed, BiAdmin will allow you to configure the NetWare Server as well as the LevelOne Printer Server.

∙BiAdmin is installed by the Administrator menu option on the CD-ROM.

∙See Chapter 5 for general information on using BiAdmin.

∙The NetWare Manual (in the Manual\NetWare folder on the CD-ROM) contains detailed information on using BiAdmin with NetWare Servers.

Other Methods

If you are unable to use Windows -based programs for configuration, the following methods are available to configure the LevelOne Printer Server:

WPConfig	This program requires Windows 3.1, and the IPX/SPX protocol.
PSConfig	Menu-based DOS program, intended only to configure the LevelOne
	Printer Server for use with NetWare V2, 3 and 4.
Quickset	Command-line DOC program, intended only to configure the LevelOne
	Printer Server for use with NetWare V2, 3 and 4. This program also has
	a limited ability to configure the NetWare Server itself.

∙These programs are provided on the CD-ROM, in the Utility folder.

∙WPConfig has a SETUP program; the other programs need only to be copied to the desired folder on your PC.

∙The documentation for these programs is provided in sub−folders of the Manual folder on the CD-ROM.

∙PSConfig and WPConfig do NOT configure your NetWare Server. It is necessary to use PCONSOLE to create the necessary print object and queues, and ensure the appropriate users have access rights to the print queues.

Configuration Data

The LevelOne Printer Server requires the following "General" data, and the data for the mode (LevelOne Printer Server or Remote Printer) you are using.

General
Device Name	The device name (Default Server Name) is shown on a sticker on
	the base of the device. Change this if you wish. The new name
	MUST NOT exceed 19 characters, nor contain any spaces.
Device Password	Default is NULL (no password).
NetWare Mode	LevelOne Printer Server or Remote Printer.
Frame Type	Select the frame types used by your network. (Ethernet 802.2,
	Ethernet 802.3, Ethernet SNAP, and Ethernet II) By default, all
	frame types are enabled.
Novell Remote Printer Mode
Novell LevelOne	NetWare LevelOne Printer Server to service the LevelOne Printer
Printer Server for P1	Server's parallel port 1.
Novell LevelOne	NetWare LevelOne Printer Server to service the LevelOne Printer

Page 74