Lexmark 5021-0XX manual Toner sensor receiver removal, Toner retract solenoid and cam removal

5021-0XX

Toner sensor (receiver) removal

Note: The toner sensor is comprised of two separate parts: the sender and receiver. The sender portion of the toner sensor is located on the right side of the printer. See “Toner sensor (sender) removal” on page 4-35for removal.

1.Remove HVPS cage. See “HVPS cage removal” on page 4-62.

2.Disconnect toner sensor cable from connector (A) on toner sensor (receiver).

3.Remove 2 screws (B); remove toner sensor (receiver).

Note: Bottom screw is longer than top screw.

AB

Toner retract solenoid and cam removal

1.For cyan retract solenoid, remove LVPS with cage. See “Low voltage power supply (LVPS) with cage removal” on page 4-60.

2.For rest of retract solenoids, remove HVPS cage. See “HVPS cage removal” on page 4-62.

3.Disconnect cable from toner retract solenoid connector (A).

4-64Service Manual