Lexmark 5021-0XX manual Configuration Change

5021-0XX

Message	Description	Action
56 Parallel Port <x>	Data has been sent	Press Go to clear message.
Disabled	to printer through a	Printer discards any data
56 Std Parallel Port	parallel port, but	received through parallel port.
	parallel port is	Make sure Parallel Buffer
Disabled
	disabled.
		menu item in Parallel Menu is
		not set to Disabled.
57 Configuration	Printer cannot	Press Go to clear message.
Change	restore confidential	Note: Messages 57
	or held jobs on hard
		Configuration Change and
	disk because print
		Held Jobs May Not Be
	configuration has
		Restored alternate on display.
	changed.
58 Too Many Flash	Too many flash	Turn off and unplug printer.
Options	memory options are	Remove excess flash memory.
	installed on printer.	Plug in printer and turn it on.
61 Defective Disk	Printer detects a	Press Go to clear message
	defective hard disk.	and continue printing.
		Install a different hard disk
		before you perform any
		operations that require one.
62 Disk Full	There is not enough	Press Go to clear message
	memory on hard	and continue processing. Any
	disk to store data	information not previously
	sent to printer.	stored on hard disk is deleted.
		Delete fonts, macros, and
		other data stored on hard disk.
63 Unformatted	Printer detects an	Press Go to clear message
Disk	unformatted hard	and continue printing.
	disk.	Format disk before performing
		any disk operations. To format
		disk, select Format Disk from
		Utilities Menu.
		If error message remains, hard
		disk may be defective and
		require replacing. Install a new
		hard disk and format it.

2-18Service Manual