Lexmark 5021-0XX manual

5021-0XX

Message	Description	Action
35 Res Save Off	Printer lacks	Press Go to disable Resource
Deficient Memory	memory needed to	Save and continue printing.
	enable Resource	To enable Resource Save after
	Save. This
		you get this message:
	message usually
	indicates too much	• Make sure link buffers are
	memory is allocated	set to Auto, and exit menus
	for one or more of	to activate link buffer
	printer link buffers.	changes.
		• When Ready is displayed,
		enable Resource Save from
		the Setup Menu.
		Install additional memory.
37 Insufficient	Printer memory (or	Press Go to print portion of job
Collation Area	hard disk, if	already stored and begin
	installed) does not	collating rest of job.
	have free space	Press Menu to open Job Menu
	necessary to collate
		and cancel current job.
	print job.
37 Insufficient	Printer cannot	Delete fonts, macros, and
Defrag Memory	defragment flash	other data in printer memory.
	memory, because	Install additional printer
	printer memory
		memory.
	used to store
	undeleted flash
	resources is full.

2-14Service Manual