Lexmark 5021-0XX manual Flash test

5021-0XX

If the test passes, then the following message is displayed:

•Disk Test/Clean Test Passed

If the test fails, then the following message is displayed:

•Disk Test/Clean Test Failed

2.Press Go, Return, or Stop to return to the device tests menu after the test is complete.

Flash test

This test causes the file system to write and read data on the flash to test the flash.

Warning: This test leaves the flash unformatted. The flash will be formatted later in this procedure.

To run the flash test:

1.Select Flash Test from the device tests menu.

•The following message is displayed to warn the customer that all flash content will be lost: “Files will be lost. Go/Stop.” Press Go to continue, Return or Stop to exit the test immediately.

•The power indicator blinks while the test is running.

•“Flash Test/Test Passed” message displays if the test passes and the power indicator turns on solid.

•“Flash Test/Test Failed” message displays if the test fails and the power indicator turns on solid.

2.Press Go, Return, or Stop to return to the device tests menu.

Diagnostic aids 3-15