
8. RAID trouble shooting
Appendix A Volume Construction & RAID Configuration
This section describes volume configuration and supported RAID level.
When configuring volume using RAID, the use of Disks of the same manufacturer and capacity is recommended to maximize stability and efficiency of configuration. In the case that the Disks differ in capacity and trademark, data may be lost due to low system stability and efficiency.
In the case that the volume of the damaged Disk must be amended, relevant data must first be backed up.
∙Single Disk (None) volumes
The volume can be configured to each Disk without configuring the RAID. This is similar to methods with general PCs that use Disks. If the Disk is damaged, the damaged Disk data may be lost.
A
A
1
BB
C
C
D
D
2
3
4
146