4. LG NAS Web Menu Use (for LG NAS administrators)
Hibernation Setup
When the volumes of LG NAS have not been accessed for a given amount of time, all the LG NAS hard disks will enter standby mode and minimize consumption of electricity. In this hibernation state, accessing volumes will cause the LG NAS’s HDD to wake up gradually, taking approximately 3 - 15 seconds.
①Click on the ‘Edit’ button to configure hibernation.
②Check ‘Enable’ to activate hibernation mode, or ‘Disable’ to deactivate. When selecting ‘Enable’, proceed to the next step.
③Set wait time.
If there is no data traffic during the given time, the LG NAS will enter hibernation mode. Time can be set to 10/30/60/120 minutes.
④Click on the ‘Apply’ button to dictate changes to the LG NAS. Click on the ‘Cancel’ button to discard changes.
69
