LG Electronics N4B1 manual IP Setup

3. LCD panel and front button usage

IP Setup

①The first time the “MODE” button is pressed will present the following display for the IP set up mode.

After the first system files are installed, the LG NAS has a default IP address of 192.168.1.200. At that time a new user IP address and network can be created.

②The IP address set up can begin by pressing the “SET” button

③By pushing the “MODE” button, the IP address can be created manually, along with default network settings, where by pressing the “SET” button, and hence the display showing “Use DHCP?”, the IP address and network settings will be automatically set up.

It is recommended that the IP address of the LG NAS is set up manually to avoid future clashes with other IP address connected to the same network. Using the DHCP set up, the last IP address digit will be either a D (Dynamic), for automatic set up, or an S (Static), for manual set up.

There are 3 steps in the manual set up of IP and network information:IP Setup -> Subnet Mask Setup -> Gateway Setup. By pressing the “MODE” button, the selected digit will be enlargened. By pressing the “SET” button, the cursor moves to the right. By pressing the ”DISC OPEN” button, the cursor moves to the left. In this way digits can be changed.

37