2. LG NAS Installation

LG NAS connection

For a particular IP address allocated from the Network IP administrator, installation using an IP address, subnet mask, default gateway and allocated DNS information is simple. Otherwise the LG NAS will automatically set up the network environment.

Connect devices as follows, referring to the user’s own network environment.

Using the included LAN cables, connect LAN ports on LG NAS and network devices (home router/router/switch/hub) to each other or directly plug them into the LAN port on the PC.

A.If the network component (home router/router/switch/hub) is used to connect the LG NAS (home router/router/switch/hub) to the PC, use the following procedure.

Internet

 

LG NAS

home router/

Desktop PC

router/switch/hub

Notebook

B.If the LG NAS is connected directly to the PC without another network device, it must be connected directly to the PC using a LAN cable,

and then the IP address must be set to 192.168.1.201 and the subnet mask to 255.255.255.0.

LAN Cable

 

 

Desktop PC

LG NAS

* In this case, PC Internet may be disconnected

24

Page 24
Image 24
LG Electronics N4B1 manual LG NAS connection