Lincoln Electric SVM161-A Optional Accessories, Compatible Equipment, Cable Plugs

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

C-2	ACCESSORIES		C-2
OPTIONAL ACCESSORIES		TIG TORCH KITS
AND COMPATIBLE EQUIPMENT		K2266-1 – TIG-Mate 17 Air Cooled TIG Torch Starter
Factory Installed		Pack. One complete easy-to-order kit packaged in its
		own portable carrying case. Includes: PTA-17 torch,
Twist-Mate Cable Connectors		parts kit, Harris flowmeter/regulator, 10 ft. gas hose,
		Twist-mate™ adapter, work clamp and cable.
1 – standard for Ground Clamp
1 – Gas Pass through for Tig Torch		K2267-1 – TIG-Mate 20 Water-Cooled TIG Torch
Strap Packet		Starter Pack.	One complete easy-to-order kit pack-
Instruction Manual		aged in its own portable carrying case. Includes: PTW-
		20 torch, parts kit, Harris flowmeter/regulator, 10 ft. gas
Field Installed		hose, Twist-Mate™ adapter, work clamp and cable,
		and 10 ft. water hose.
K857 - Remote Output Control - For Stick welding.		CABLE PLUGS
When the V205-T’s Output Control is in the "REMOTE"
position, this portable current control provides the		K852-70 - Cable Plug Kit for 1/0-2/0 cable. Attaches to
same range as the current control on the welder.		welding cable	to provide quick disconnect from
Consists of a 6-pin Amphenol connector which plugs		machine.
into the remote control Amphenol. 25 foot cable length.
K870 - Foot Amptroltm for TIG welding. When the		Twist-Mate Torch Adapter K1622-1 - One is shipped
		with the welder torch. If you do not care to interchange
V205-T’s Output Control is in the “REMOTE” position,		this part between torches (one is required to connect
the foot Amptrol energizes the output and controls the		Magnum PTA-9 or PTA-17 TIG torches with one-piece
output remotely. The Foot Amptrol connects directly to		cable to the V205-T) you may order an additional
the 6 pin Amphenol.		adapters. The quick connect plug provides connection
K963-3 - Hand Amptroltm for TIG welding. When the		for both gas and welding current.
V205-T’s Output Control is in the “Remote” position,		K1622-4 – Twist-Mate adapter for Water-Cooled TIG
the hand Amptrol energizes the output and controls the		torches. Adapter for PTW-18 and -20 Torches.
output remotely. The Hand Amptrol connects directly to
the 6 pin Amphenol.		TIG Torch Parts Kits - Parts kits are available for the
		PTA-9 and PTA-17 TIG torches. These kits include
K814 - Arc Start Switch - Energizes the output for TIG		back cap, collets, collet bodies, nozzles and tungstens.
		Order KP507 for PTA-9 torches
welding if remote output control of the amperage is not		Order KP508 for PTA-17 torches
desired. It allows on/off TIG welding at the current set		See publication E12.150 for parts kits breakdown.
by the Current Control on the control panel. When		Cut Length Consumables - TIG welding filler metals
using the Arc Start Switch set the Output Control to the		are available for welding stainless steel, mild steel, alu-
“LOCAL” position.		minum and copper alloys. See publication C9.10.

Magnum® PTA-9 and PTA-17 TIG Torches - The fol- lowing standard Magnum® TIG torches with one-piece cable may be used with the Invertec® V205-T.

• K1781-1	PTA-9	12.5 ft	medium back cap
• K1781-3	PTA-9	25 ft	medium back cap
• K1782-1	PTA-17	12.5 ft	long back cap
• K1782-3	PTA-17	25 ft	long back cap

NOTE: Each torch requires a Twist-Mate adapter, (one is included with the machine). Collets, collet bodies, and nozzles are not included and must be ordered separately.

INVERTEC® V205-T AC/DC™