Lincoln Electric SVM 106-A Welding Guns, K480 Input Cable, K584 and K594 Input Cables

C-6 ACCESSORIES

Return to Section TOC

Return to Section TOC

Section TOC

Return to Master TOC

Return to Master TOC

Master TOC

K480 INPUT CABLE

The K480 input cable includes a 2/0 (67 mm2) weld cable with a Twist-MateTMconnector and a 14-pin (MS-3106A-20- 27PX) plug to be compatible with the smaller Lincoln power sources (such as the CV-300). The K480 is rated at 400 amps, 60% duty cycle and is available in 10, 25, and 50 foot (3.0, 7.6, and 15.2 m) lengths.

K584 AND K594 INPUT CABLES

The K584 input cable includes a 1/0 (53 mm2) electrode cable rated at 350 amps, 60% duty cycle, and the K594 input cable includes a 3/0 (85 mm2) electrode cable rated at 600 amps, 60% duty cycle. Both are for power sources with stud output terminals and a 14-pin control receptacle, and are available in 10, 25, and 50 foot (3.0, 7.6, and 15.2 m) lengths.

WELDING GUNS

INNERSHIELD GUNS

The K126 gun and cable assembly is recommended for most welding with 0.062 in. through 3/32 in. Innershield electrodes at up to 350 amps. Install the insulated nozzle extension (or thread protector) and the nozzle contact tip for the stickout and electrode size being used. (See Figure C.1.)

For heavy duty welding at up to 450 amps and with 0.068 in. through 3/32 in. Innershield electrode, use an appropriate K115 or K115-45 gun and cable assembly (See Figure C.2). Install the proper insulated nozzle extension and contact tip for the stickout and electrode size being used.

For welding with 7/64 in. Innershield electrode, use a K115-3/32 with an M11474-

120nozzle or a K115-45-3/32 with an M11510-120 nozzle. Also install a 7/64 in. contact tip and install the insulated nozzle extension for the stickout being used.

NOTE: LinconditionerTM guns are recommended for locations where smoke accumulation is a problem and conventional exhaust systems are ineffective. The available smoke removal type Innershield guns and vacuum units can be used in these locations. Instructions are shipped with the equipment.

FIGURE C.2 – THE K115 AND

K115-45 GUNS.

Return to

Return to Section TOC

Return to

Return to Master TOC

FIGURE C.1 – THE K126 GUN.

LN-7 GMA WIRE FEEDER