Lincoln Electric SVM 106-A Mounting Location Input Cable Connections, Machine Grounding

TOC

TOC

	INSTALLATION	A-3
MOUNTING LOCATION	INPUT CABLE CONNECTIONS

Return to Section

to Section TOC

Return to Master

to Master TOC

The LN-7 GMA wire feeders can be mounted directly on top of the power source providing that it is secure and level. The LN-7 can be mounted to an undercarriage when portability is required.

A K178-1 swivel platform is available for mounting the LN-7 GMA to a power source. Refer to the accessories section for details.

MACHINE GROUNDING

The LN-7 GMA wire feeders are ground to the power source through the input cable. The power source grounding terminal must be properly connected to electrical ground per the power source operating manual.

Refer to Section C, Accessories, for descriptions of the various input cable assemblies available for the LN-7 GMA wire feeder.

WARNING

Turn input power off before connecting the LN-7 GMA wire feeder.

For connecting an LN-7 GMA to a specific Lincoln power source follow steps 1 through 6, and refer to the connection diagrams in Figure A.3 through A.17 for the specific power source. Table A.1 lists each figure number with its corresponding power source.

Return

Return to Section TOC

Return to Section TOC

Return

Return to Master TOC

Return to Master TOC

		TABLE A.1 - LN-7 GMA CONNECTION DIAGRAMS
Figure #		Power Source
A.3	LN-7 GMA To DC-400, DC-250 and CV/CVI Power Sources With Terminal Strip - Connection
	Diagram
A.4	LN-7 GMA To Pulsed Power 500 - Connection Diagram
A.5	LN-7 GMA To CV/CVI Power Sources With 14 Pin Amphenol Connector - Connection Diagram
A.6	LN-7 GMA To CV/CVI Power Sources With Twist-Mate Connector and 14 Pin Amphenol/Remote
	Control - Connection Diagram
A.7	LN-7 GMA To CV/CVI Power Source (K867/K775) - Connection Diagram
A.8	LN-7 GMA To R3S-250 or R3S-325 - Connection Diagram
A.9	LN-7 GMA To SAM Motor Generator or Engine Welder - Connection Diagram
A.10	LN-7 GMA To DC-600 - Connection Diagram
A.11	LN-7 GMA To R3S-400, 600, or 800 - Connection Diagram
A.12	LN-7 GMA To Most Lincoln Motor Generators - Connection Diagram
A.13	LN-7 GMA To WP250 or G9 PRO - Connection Diagram
A.14	LN-7	GMA To Ranger 9 - Connection Diagram
A.15	LN-7	GMA To Ranger 10-LX - Connection Diagram
A.16	LN-7	GMA To Power Sources With No Output Contactor - Connection Diagram
A.17	LN-7	GMA To Power Sources With Contactor and No Terminal Strip - Connection Diagram

LN-7 GMA WIRE FEEDER