4.Work ports: Allows a maximum of four ports to be aggregated at the same time. If the group is defined as a LACP static trunking group, then any extra ports selected are placed in a standby mode for redundancy if one of the other ports fails. If the group is defined as a local static trunking group, then the number of ports must be the same as the group member ports.
NOTE: If LACP is enabled, you can configure LACP Active/Passive status in each port on State Activity page.
2.4.5.2 Aggregator Information
This page displays a summary report on the current LACP aggregator status.
1.In this example there is no group active. LACP is not operational.
2.In this example there are 2 Static Trunking groups.
3.In this example there is an active LACP trunking group.
- 18 -
