4.3.3 GVRP
(GARP [Generic Attribute Registration Protocol] VLAN Registration Protocol)
GVRP allows automatic VLAN configuration between the switch and its nodes. If the switch is connected to a device with GVRP support, then a GVRP request can be issued from the device to the switch using a valid VID of a VLAN defined on the switch. The switch will then automatically add the device to the existing VLAN entries.
From this page you can enable or disable the GVRP (GARP VLAN Registration Protocol) support.
NOTE: GVRP must also be enabled on participating network nodes.
4.3.4 IGMP
The 24 + 2 Giga SNMP Ethernet Switch supports IP multicasting via the IGMP protocol.
Administrators can enable IGMP and then display the IGMP snooping information. Multicast groups, VID and member port information.
This page allows administrators to enable or disable the IGMP support.
- 62 -
