![](/images/new-backgrounds/1186433/18643363x1.webp)
Misc Configuration
(LINDY recommends that these parameters not be changed, unless you have extensive knowledge of 802.1x configuration)
This allows you to change the default configuration for the 802.1x standard:
Quiet Period - Used to define periods of time during which it will not attempt to acquire a supplicant (Default time is 60 seconds).
Tx Period - Used to determine when an EAPOL PDU is to be transmitted (Default value is 30 seconds).
Supplicant Timeout - Used to determine timeout conditions in the exchanges between the supplicant and authentication server (Default value is 30 seconds). Server Timeout - Used to determine timeout conditions in the exchanges between the authenticator and authentication server (Default value is 30 seconds). ReAuthMax - Used to determine the number of
2.5 TFTP Update Firmware
The TFTP menu option allows you to load a new firmware image into the switch:
•Install TFTP program (TFTP applications can be found on the internet).
•Copy the updated firmware image.bin into the TFTP server’s upload/download directory.
•Start the TFTP application, you should see a “waiting for connection” type prompt within the application.
•In web management select administrator— TFTP update firmware.
•Download the new image.bin file by pressing <apply>. (The file name needs to match the name of the file copied into the TFTP upload/download directory.
•After the update has finished, press <reboot> to restart switch.
- 31 -