Lindy 25030 user manual STP System Configuration, Perport Configurations

4.3.1.2 STP System Configuration

<-Actions->

1.Root Bridge information is displayed on the Left.

2.Parameters can be defined on the Right.

NOTE: The parameters are described in more detail in sections 2-4-8.

4.3.1.3 Perport Configurations

<-Actions->

1.PortState: Displays the spanning tree status for each port. Forwarding or Blocking.

2.PathCost: Specifies the path cost for the port. This is used in determining which ports are used as forwarding ports.

3.Priority: This defines the port priority. Low values are more likely to become the root port.

-56 -