4.2.1 Port Configuration
Edit / View the port configuration.
1.InRate (100K/unit):
0:disable rate control.
1~1000: valid rate value.
2.OutRate (100K/unit):
0:disable rate control.
1~1000: valid rate value.
3.Enabled:
Enables or Disables this port in the switch. “Yes” = Enable.
“No” = Disable.
4.Auto:
Define Auto negotiation mode. Options: “Auto”, “Nway_Force”, “Force”
Spd/Dpx:
Define the port speed and Duplex.
5.Flow Control:
Full: Enables or Disables Full Duplex flow control
Half: Enables or Disables Half Duplex flow control. (Backpressure)
- 38 -
