- 19 -
2.4.5.3 State Activity
Active (selected): The port automatically sends LACP protocol packets.
N/A (not selected): The port does not automatically send LACP protocol packets,
and responds only if it receives an LACP protocol packet from a remote device.
NOTE: Work Ports defined, as LACP enabled in the ‘Aggregator Settings’ page will
automatically have their LACP Activity State enabled.
2.4.6 Filter Database
2.4.6.1 IGMP Snooping
The 24 + 2 Giga SNMP Ethernet Switch supports IP multicasting via the IGMP
protocol. Administrators can enable IGMP within the w eb m anagem ent’s “ For w ar di ng
and Filtering” page, then display the IGMP snooping information. Multicast groups,
VID and member port information.
IP multicast addresses range from 224.0.0.0 through to 239.255.255.255.