Lindy 25030 user manual Port status

2.2. Port status

This page displays the current status of every port. It will display the users selection for each port followed by the actual discovered settings.

1.State: Display port status: On or Off, Off indicates port is disabled.

2.Link Status: Down indicates “No Link”, Up indicates “Link”.

3.Auto Negotiation: Display the auto negotiation mode: Auto/Force/Nway-forced.

4.Speed Status: Displays 1000Mbps, 100Mbps or 10Mbps speeds.

Note: port 1- 24 are 10/100Mbps, Port 25-26 are 10/100/1000Mbps.

5.Duplex Status: Displays full-duplex or half-duplex mode.

6.Flow Control: Full: Displays flow control status in Full Duplex mode. Half: Displays flow control status in Half Duplex mode.

7.Rate Control: Displays the current rate control setting of the selected port. Ingr: Display the effective port ingress rate as defined by the user.

Egr: Display the effective port egress rate as defined by the user.

8.Port Security: Displays the status of port security.

9.Config: (configured) Displays the state defined by the user.

10.Atual: (actual) Displays the negotiation result.

- 10 -