Console Port Information | Lindy 25030 instruction

Qos Policy: High Priority Levels: This is used to map the 0~7 priority levels to either High or Low queues.

Collisions Retry Forever: (this setting only affects Half Duplex connections)

Disable – Any collisions are retried for a maximum of 48 times, after which the packet will be dropped.

Enable – Collision will be retried indefinitely.

802.1x Protocol: Enables or disables the 802.1x port security protocol.

2.4.3 Console Port Information

The Console port on the 24 + 2 Giga SNMP Ethernet Switch is a standard RS-232 UART interface. This is used to connect to the serial interface on your PC, or terminal.

You can use Windows HyperTerminal program to link the switch to your PC. The following settings need to be configured into your Terminal Application:

Bits per seconds: 9600

Data bits: 8

Parity: none

Stop Bits: 1

Flow control: none

- 15 -

Image 16

Lindy 25030 user manual Console Port Information

Contents

24 + 2 Giga Snmp Ethernet Switch Contents Page Installation Unpacking Desktop or Shelf Installation Rack InstallationPower On the Switch LED indicators information Initial set up for management Out-of-Band Terminal Mode Configuration In-band management through Ethernet Modify Switch’s IP address via Out-of-Band methodGateway Modify Network Adapter’s IP address Telnet IP Address of Switch Telnet management Web Management Function Web Management Home Overview Port status Port Statistics and Status Popup Window Port Statistics Administrator IP Address/Subnet Mask/Gateway Switch Settings 2.4.2.1 Basic Module Info Priority Queue Service settings 802.1p Miscellaneous SettingAdvanced Console Port Information Port Controls Flow control Aggregator setting Trunking Aggregator Information State Activity Filter Database 2.4.6.1 Igmp Snooping Static MAC Address Message Description Query MAC filtering Vlan configurationSupport Port-based Vlan Support Tag-based Vlan Ieee 802.1Q Vlan Support Protocol-based Vlan Port Based Vlan 7.2 802.1Q Vlan Basic Port VID Configure port VID settings Spanning TreePort VID Pvid Ingress FilteringPage Port Sniffer Port Mirroring SNMP/Trap Manager Security Manager Click Apply System Configuration 12 802.1x ConfigurationPerport Configuration Tftp Update Firmware Misc Configuration Configuration Backup Tftp Restore Configuration Tftp Backup Configuration Reset System Reboot Console -- 1K Xmodem update firmware Page Out-of-band Terminal mode management Main Menu Switch Static Configuration Control Keys Port Configuration Trunk Configuration Vlan Configure Create a Vlan Group Create a Port-Based Vlan Groups Sorted Mode Edit / Delete a Vlan Group Misc Configuration MAC Age Interval Max Bridge transmit delay bound Broadcast Storm Filtering Port Security Collision’s Retry Forever Port Mirroring Configuration Administration ConfigurationChange Username Change Password Priority Configuration 7.2 802.1p Priority Configuration Port Static Priority MAC Address Configuration Static MAC Address Add static MAC address -Actions Edit static MAC address -Actions Press Edit key Delete static MAC address -Actions Filtering MAC Address Add filter MAC address -Actions Edit filter MAC address Protocol Related Configuration Delete filter MAC address Actions STP Enable 1 STP STP System Configuration Perport Configurations Snmp System Options Community Strings Add Community Name Enter Edit Community NameDelete Community Name Trap Managers Add Snmp trap manager Edit trap managers Delete trap manager Gvrp Igmp Working Port Setting Lacp Link Aggregation Control Protocol Lacp Status Static trunk group 6 802.1x Protocol Lacp trunk group 6.1 802.1x Enable 6.2 802.1x System Configuration 6.3 802.1x Misc Configuration Status and Counters Port Counters Reboot Switch System Information Default Restart Restore Configure File Backup Configure File Vlan applications used with switch Application Examples Trunking Applications used with the switch FCC Compliance Statement United States Canadian Department of Communications RFI statement