Instant Broadband® Series

10.If you want to enter a description for your filter, click the Description tab and enter the description there.

11.Click the OK button and the New Rule Properties screen should appear with the IP Filer List tab selected, as shown in Figure C-9. There should now be a listing for “router -> win” and “win -> router”. Click the OK (for WinXP) or Close (for Win2000) button on the IP Filter List window.

Figure C-9

EtherFast® Cable/DSL Firewall Router with 4-Port Switch/VPN Endpoint

Step Three: Configure Individual Tunnel Rules

Tunnel 1: win->router

1.From the IP Filter List tab, shown in Figure C- 10, click the filter list win->router.

Figure C-10

2.Click the Filter Action tab (as in Figure C-11), and click the filter action Require Security radio button. Then, click the Edit button.

Figure C-11

104

105

Page 56
Image 56
Linksys BEFSX41 manual Tunnel 1 win-router, Step Three Configure Individual Tunnel Rules