Linksys BEFSX41 manual Figure G-5

Instant Broadband® Series

2. In the command prompt, enter ipconfig /all. Then press the Enter key.

Figure G-5

3.Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet adapter. This will appear as a series of letters and numbers.

The MAC address/Physical Address is what you will use for MAC Address Cloning.

Note: The MAC address is also called the Physical

Address.

The example in Figure G-5 shows the IP address of your Ethernet adapter as 192.168.1.100. Your computer may show something different.

EtherFast® Cable/DSL Firewall Router with 4-Port Switch/VPN Endpoint

When entering information for MAC Address Cloning, type the 12-digit MAC address (see Figure G-6).

Figure G-6

124 125