Client Software for PC or Mac

• Cameras are shown with one of the following icons:

Camera online, but not selected in live view.

Camera online and selected in live view.

Manual recording is currently activated.

Camera is offline (connection issue).

•Click-and-drag cameras to the display grid to open them.

•All Files: Open Manual Recordings for this NVR or camera group. See “Using All Files to View Manual Recordings and Downloaded Video Files” on page 93.

•Picture: Open screenshots for this NVR or camera group. See “Using Pictures to View Screenshots” on page 94.

2Hide NVR/Camera List: Click the arrow to hide/show the NVR/Camera List.

3Alarm: Click to show the Alarm Panel. The Alarm Panel shows a list of system alarms and events, such as motion detection events. Note that you must enable Notify Surveillance Center to Receive notifications of motion events. For details, see “Configuring Motion Detection Alarm Settings” on page 59.

4Event: Not supported.

5Alarm Actions:

• Clear Alarms: Click to clear all alarms from the list.

• Enable Alarm Popup Window: Click to have alarms appear in a popup window.

• EnableAudioAlarms:ClicktohavetheClientSoftwareplayanalarmsoundwhenalarms occur.

6Main View Toolbar:

•Full-Screen: Click to open the display grid in full-screen. Press ESC to exit full-screen.

•Select Layout : Click to select a display grid layout.

•Stop/Resume Live Display : Click to stop camera streaming on all channels. Click again to resume camera streaming.

•Screenshot : Click to save a screenshot of the currently selected channel.

89