Client Software for PC or Mac

General

The General sub-menu allows you to configure general system settings.

To configure general settings:

1Configure the following:

•Device Name: Enter a name for your NVR.

•Device No.: Enter the ID for the remote control. For details, see “Pairing the Remote Control” on page 68.

•Record Replace: Select Yes to enable overwrite, or select No to disable overwrite.

•Syncronous IPC: Make sure this is checked.

2Click Save to save changes.

Camera

NOTE: Do not change any settings in this sub-menu. To configure camera settings, see “Camera Settings” on page 117.

111