Client Software for PC or Mac

•Select one of the standard templates or select Template01~08 and click Edit to create a custom template. Click and drag on each day to configure when motion detection is enabled. Click Save when finished making changes.

•Click Confirm to save changes to the schedule.

7Under Warning, check to enable the following warnings when motion is detected:

•Full Screen Monitoring: The selected channel will open in full screen.

•Audible Warning: System will beep.

•Notify Surveillance Center: An alert will be sent to the client software.

•Send Email: An alert email will be sent. Note that you must set up email alerts. For details, see “Configuring Email Alerts” on page 70.

8Under Triggered Camera, select which channels will start to record when motion detection is triggered on the selected channel.

9Click Save to save changes.

Configuring Tampering Alarm Settings

The Tampering Alarm is activated if the camera lens is covered, for example if a vandal sprays paint on the camera.

To configure Tampering Alarm settings:

1Under Camera, select the camera you would like to configure.

2Click Tampering Alarm.

3Check Enable Tampering Alarm to enable the Tampering Alarm on the selected camera or un-check to disable.

4Click and drag in the video display area to enable areas the camera will watch for tampering.

Click and drag to select

Tampering Alarm areas

126