Configuration

3Click Configuration.

4Under Auto Logout, select the amount of time menus will remain open while the system is idle or select Never to disable auto logout.

Select the Auto Logout time

5Click Apply to save changes. Right-click repeatedly to return to live view.

Pairing the Remote Control

The remote control comes pre-paired to your NVR. If you have more than one NVR, you can pair the remote control to a specific NVR.

To pair the remote control to an NVR:

1Right-click and then click Menu.

2Enter the system user name (default: admin) and password (default: 000000) and click Yes.

3Click Configuration>General>More Settings.

4Click Device No. and then enter a unique ID for your NVR.

Enter a unique ID number for you NVR

5Click Apply to save changes. Right-click repeatedly to return to live view.

6On the remote control, press DEV. Then, press the number you selected in step 3 and press Enter. Your remote control will now be paired with the NVR.

Adjusting BNC Video Out Brightness (16-Channel Only)

On the 16-channel model, you can adjust the brightness for a monitor connected to the Video Out (BNC) port.

To adjust the video out brightness for the BNC monitor:

1Right-click and then click Menu.

2Enter the system user name (default: admin) and password (default: 000000) and click Yes.

3Click Configuration>General>More Settings.

68