Client Software for PC or Mac
5Under Warning, check to enable the following warnings when the Video Loss Alarm is triggered:
•Full Screen Monitoring: The selected channel will open in full screen.
•Audible Warning: System will beep.
•Notify Surveillance Center: An alert will be sent to the client software.
•Send Email: An alert email will be sent. Note that you must set up email alerts.
6Click Save to save changes.
PTZ Control (Not Supported)
Network Connection (Not Supported)
System Configuration
The System Configuration menu allows you to configure settings for the Client Software.
To access System Configuration:
• From the Control Panel, click System Configuration ( | ). |
General
To configure General client options:
1Configure the following:
•Interval of Screen Switching: Select the time channels will be shown in Main View before switching when Sequence mode is on.
•Log Keeping Time: Select the amount of time the client software will retain system logs.
•View Scale: Select the aspect ratio for your cameras:
•Network Performance: Select Low, Middle, or High.
•CPU Performance: Select Low, Middle, or High.
129