6Click System Time and then click the up and down buttons to set the time.
Click System Time and click up and down to set the time
7Click Apply to save changes.
Configuring Daylight Savings Time (DST)
If your region observes Daylight Savings Time (DST), follow the instructions below to configure your NVR to automatically update the time when the clock updates.
To enable automatic DST adjustments:
1
2Enter the NVR’s user name (default: admin) and password (default: 000000) and click OK.
3Click Configuration and then click the DST Settings tab.
Check Enable DST to use
default DST settings
Check AutoDST Adjustment and select custom DST start and end times
4Check Enable DST and configure the following:
•From: Select the start time for Daylight Savings.
•To: Select the end time for Daylight Savings
•DST Bias: Select the amount of time the clock changes when DST starts and ends.
5Click Apply to save changes.
20