Camera
6Use the Sensitivity slider to select the sensitivity for
Checkto enableTampering alarms
Click and drag to select
7Click and drag inside the image to select the area where you would like to detect video tampering. It is recommended to place the area in the middle of the image.
8Click under Action to open the Action menu.
Click to open the action menu
9In the Arming Schedule tab, configure the times of day you would like
•Under Week, select the day of the week you would like to configure.
•Configure up to 8 time periods per day when motion detection will be enabled.
•Click Copy to copy the currently selected day’s schedule to other days of the week.
Select day of the week
Enter times when tamper alarms will be enabled
10In the Action tab, check the alert actions that you want to occur if the lens is covered on the selected channel.
•Full Screen Monitoring: The selected channel will open in full screen.
•Audible Warning: System will beep.
•Notify Surveillance Center: An alert will be sent to the client software.
63