Configuration

Live View

Configuring Dwell Times

The Dwell Time refers to the amount of time channels or screens are shown before switching when Sequence Mode is activated.

The Full Screen Monitoring Dwell Time refers to the amount of time channels are shown in full screen after alarms occur, if Full Screen Monitoring is enabled.

To configure Dwell Times:

1Right-click and then click Menu.

2Enter the system user name (default: admin) and password (default: 000000) and click Yes.

3Click Configuration>Live View.

4Under Dwell Time, select the amount of time channels or screens are shown in Sequence mode before switching.

NOTE: If you select No Switch, you will not be able to activate Sequence mode.

5Under Full Screen Monitoring Dwell Time, select the amount of time channels are shown in full screen after alarms occur.

Select the Dwell time

Select the full-screen pop up time

NOTE: Alarms must be enabled with full screen monitoring must be enabled before cameras will be shown in full screen. If alarms occur simultaneously on multiple channels, each channel will be shown in full-screen for this long before switching to the next channel.

6Click Apply to save your settings. Right-click repeatedly to return to live view.

Configuring the Layout of Channels

You can customize where channels will appear on screen.

To configure the layout of channels:

1Right-click and then click Menu.

2Enter the system user name (default: admin) and password (default: 000000) and click Yes.

3Click Configuration>Live View>View.

73