Playback

Using the Playback Menu to Search for Recordings

You can use the Playback menu to search for recordings on the system. You can search by time, by event type (e.g. motion), or by tags.

Normal Search

The Normal Search menu is used to search for video based on a specified start and end time.

To search for video using a start and end time:

1Right-click and then click Menu.

2Enter the NVR’s user name (default: admin) and password (default: 000000) and click OK.

3Click Playback.

4Under IP Camera, check the cameras you would like to search for video. Check IP Camera to select/deselect all cameras.

Selectcamerasto playback

Select recording type

Select Start Time Select End Time

5Under Record Type, select the types of recording you would like to search for: Continuous & Motion, Motion, Manual, or All.

6Under Start Time, select the start time for your search. Click inside the field on the left and use the calendar to select the start date. Click inside the field on the right and use the buttons to adjust the start time for playback. Click outside the field to confirm the time.

NOTE: If you right-click, it will exit the Normal Search menu.

7Under End Time, select the end time for your search in the same way that you selected the Start Time.

8Select one of the following:

• Click Playback to start playback at the earliest available footage in your selected time range.

24