Maintenance

7Click on the firmware file and click Upgrade.

Click the firmware file

Click Upgrade

8Click Yes to confirm.

9Wait for the firmware upgrade to complete. Do not disconnect the power or remove the USB flash drive during the firmware upgrade. The NVR will reboot once the firmware upgrade is completed.

Default

Resetting the System to Factory Default Settings

Restoring to factory default settings reverts any setting changes you have made to their original settings. This does not affect the recordings saved on the NVR.

To reset to factory default settings:

1Right-click and then click Menu.

2Enter the system user name (default: admin) and password (default: 000000) and click Yes.

3Click Default then click OK. The system will reboot and then restart with the factory default settings.

Click Ok to reset the NVR to factory default settings

81