HDD

To set S.M.A.R.T. settings:

1Right-click and then click Menu.

2Enter the system user name (default: admin) and password (default: 000000) and click Yes.

3Click HDD>HDD Detect.

4Under HDD, select the hard drive you would like to check.

NOTE: You can see the HDD No. of installed hard drives under the HDD>General sub-menu.

5Under Self-test Type, select the type of S.M.A.R.T. test you would like to run.

6Click next to S.M.A.R.T. to begin the S.M.A.R.T. test. Wait for the test to complete.

Select hard drive

Select S.M.A.R.T. test type

Click to start test

Checking the Hard Drive for Errors

The NVR can check the hard drive for errors or bad sectors.

To check the hard drive for errors:

1Right-click and then click Menu.

2Enter the system user name (default: admin) and password (default: 000000) and click Yes.

3Click HDD>HDD Detect>Bad Sector Detection.

4Under HDD, select the hard drive you would like to check.

NOTE: You can see the HDD numbers of installed hard drives under the HDD>General sub-menu.

48