Client Software for PC or Mac

Network

The Network sub-menu allows you to configure networking settings. The Network sub-menu is divided into the following tabs:

The General tab allows you to configure the IP address of the NVR for fixed IP or DHCP mode. It also allows you to configure system port numbers.

The Advanced tab allows you to configure additional advanced networking settings.

To configure your NVR’s IP address for fixed IP or DHCP mode:

1Select the General tab.

2Check Auto-obtainto use DHCP mode and have the router automatically assign an IP address to the NVR. Un-check to use a fixed IP address to your NVR.

3If you un-check Auto-obtain:

•Under Device IP Address, enter the IP address your NVR will use. Please note that additional configuration may be required on your router. See your router’s user manual for details.

•Under Subnet Mask, enter the subnet mask.

•Under Gateway, enter the default gateway address.

•Click Advanced Settings>Advanced Settings. Under DNS Server Address 1 & 2, enter the DNS address and click Yes.

4Click Save. Your NVR may restart.

NOTE: If you change the NVR’s IP address and you have configured port forwarding, you will need to re-configure it using the newly selected IP address.

112