Camera

Image

Configuring Camera Image Settings

1Right-click and then click Menu.

2Enter the system user name (default: admin) and password (default: 000000) and click Yes.

3Click Camera>Image.

4Under Camera, select the camera you would like to adjust.

5Use the sliders to adjust the Brightness, Contrast, Saturation, and Hue. Note that it may take a couple seconds for changes to occur.

Select camera

Adjust image settings

6Click Apply to save changes.

Motion

Configuring Motion Detection Settings

By default, motion detection is enabled on all connected cameras. You can enable/disable cameras for motion detection.

You can also enable/disable parts of the image for motion detection. For example, you can disable motion detection where your camera overlooks a public street but enable motion detection to trigger when someone enters your driveway.

To configure motion detection settings:

1Right-click and click Menu.

2Enter the system user name (default: admin) and password (default: 000000) and click Yes.

3Click Camera>Motion.

4Under Camera, select the camera you would like to configure.

58