![](/images/new-backgrounds/1255683/255683259x1.webp)
|
| North | ||
Present | ||||
position |
|
|
|
|
arrow |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Magenta trail line
Trail point ![](/images/new-backgrounds/1255683/255683259xi2.webp)
Navigate trail, map views: the driver (left) is northbound heading straight toward trail point 6. The northbound driver (right) has reached point 6 and has turned west to follow trail.
1.Press MENUMENU↓ to MY TRAILSENT.
2.Press ↓↓ to enter the Saved Trail list, then use ↑ or ↓ to select the desired Trail NameENT.
3.Press → to DELETE TRAIL↓ to NAVIGATEENT.
4.Press ↓ to NAVIGATE→ to REVERSEENT← to NAVIGATEENT. The unit begins showing reverse navigation information along the trail.
NOTE:
If you are already located at or near the end of your trail, the arrival alarm will go off as soon as you hit Enter. Just press EXIT to clear the alarm and proceed.
5.Now, begin moving and follow your unit.
6.When you reach your destination, be sure to cancel your navigation. Press MENUMENU↓ to CANCEL NAVIGATIONENT. The unit asks if you're sure, press ←ENT.
Transfer Custom Maps and GPS Data Files
Custom Maps:
Custom maps work only from the MMC card or SDC card. When a card containing a Custom Map File is loaded into the unit, it automatically loads the map into memory when the unit is turned on.
Instructions for copying Custom Map Files to an MMC are contained in the instruction manual for your MMC card reader and MapCreate 6 software. For instructions on inserting a MMC into the Unit, see Sec. 2, Installation/Accessories.
122