DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 12
Getting Started
User Guide
Device Overview
—The Device Overview page displays a list of all the devices you can control. You can jump to the main control page of your device by tapping the device button in the list.
Access the Device Overview page by tapping the DEVICE OVERVIEW button at the middle of the UPPER TOOL BAR.
When you jump to a Device by tapping the device button in the Device Overview pages, the RC9500 will change the input of your home theater receiver/preamp.
Note The commands assigned to the device button are called
the Device Actions.
If you have more than seven devices, scroll arrows 
allow you to navigate to the next Device Overview page.
zUsing Device Overview without Changing Input (No IR) If you don’t want to change the input for your receiver/preamp, you can only jump to a Device without changing the input by the following steps;
1.Display the Device Overview page, by tapping the DEVICE OVERVIEW button.
2.Look at the label for the Left and Right Function buttons. At this moment, they are labeled “No IR”.
3.Press and hold either one of the Left and Right Function buttons, then tap the device you would like to jump to. No “input select” commands will be sent to your receiver/preamp.
8
