Marantz RC9500 manual Programming Macros & Page Jumps

DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 29

6.

Customizing Your RC9500

Programming Macros & Page Jumps

You will do all of your Macro/Jump programming within a screen that will appear after you press the Macro button on the Mode menu page. Before proceeding with programming, make sure that you understand how to move around in the MACRO mode and how to read the RC9500’s shorthand notation for each macro step. (see page 42)

1Write a list of all of the actions in the operation you want to record.

2Play with all of the example Macro buttons in MACRO device. Are any of these examples adaptable to your purposes?

3Use DELETE mode to delete all of the macro devices that you don’t like. (see page 40)

4Use ADD mode to add a new macro device empty of any programming from the device list. (see page 37)

5Switch to LABEL mode to re-label your macro devices. (see page 34)

6Switch to MOVE mode to re-order your macro devices, so that the most commonly used Macro devices are near the top. (see page 41)

7Switch to LABEL mode and navigate to your new macro device. Relabel the macro buttons with an appropriate name. The buttons are large so try to imagine a descriptive name even if it requires a few words.

8Switch to MACRO mode. Tap the “Macro to button” to

proceed.

Note If you like to create a macro to the Device button, tap the

“Macro to device” button instead of the “Macro to button”

button.

User Guide

25