DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 22
Customizing your RC9500
1.
2.
Introduction
It is best to proceed with customizing in several stages.
The first stage is to teach all your existing remote codes to the RC9500. The second stage is to practice using your home theater system with the RC9500. As you gain familiarity with your system, you’ll notice that many operations in a home theater require several steps. In the third stage of customization, you will record multiple step operations as either a “Macro” that you can play back with one button push or as a list of numbered steps recorded in a “Help List” device.
In the next few pages you’ll find step by step guidelines on each of the three stages. If a more detailed explanation exists in the Reference section, the page number is indicated..
Cloning All Your Existing Remotes
1Gather all of your remote controls in front of you.
2Play with all of the example devices. Compare the devices with your existing remote controls. Can you use any as templates for
3Use DELETE mode to delete all of the devices that you don’t use. (see page 39)
4Use ADD mode to add devices for each Marantz products. (see page 37)
When you are prompted to add with or without RC codes, choose “Create with RC codes”.
5Use ADD mode to add devices for each
6Switch to USE Mode or LEARN Mode to evaluate the page layouts of the new devices.
User Guide
18
