DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 59
Reference
User Guide
3Select the device for which you want to change the IR / RF settings.
The IR / RF setting page appears. The reversed color button labeled “IR” indicates that the selected device is currently operated with IR signals.
4Tap “RF” button. The IR/RF settings for the selected device are
changed from IR to RF.
When you have several
devices, you have to assign the correct Extender ID to the selected device. Continue with Step 5.
When you have only one
Note The ID on the RF Extender has to match the Extender ID on the Remote Control.
5Press 
and 
buttons beside the Extender ID label to change the Extender ID number.
The RC9500 offers 16 Extender IDs.
6Tap “Done” to save the IR/RF settings for the selected device or Press the Right Function button labeled “Cancel” to return without changing the IR/RF settings for the selected device.
7Repeat instructions 1 to 3 for all devices
for which you want to change the IR/RF settings.
8Tap 
label to return to the Mode Menu page.
The RC9500 is configured to operate the devices you have set with RF signals.
9Return to USE mode by pressing the Left Function button labeled “Exit” and try out the devices for which you just changed the IR/RF settings.
Note It is possible that a device does not respond properly when operated with RF signals. In that case, you have to reconfigure the Remote Control to operate the device with IR signals again.
55
