User Guide
16
RC9500 provides different modes. For customizing your RC9500
you have to switch to the appropriate mode via the Mode Menu
page.
The mode menus are utilized as follows:
1 Tap and hold the MODE icon more
than 3 seconds in the LOWER TOOL
BAR. The Mode Menu page will appear.
2 Select the mode you wish to use to
customize your RC9500 by tapping the
appropriate button on the Mode Menu.
When you operate your devices, the
RC9500 is in USE mode.
For actions other than operating
(like learning IR commands, recording macros, adding devices,
and so on), you have to switch to the appropriate mode:
For learning IR commands from other remotes. (Page 28)
For labeling buttons, pages and devices. (Page 32)
For adding new devices and copying existing devices. (Page 35)
For deleting buttons and devices. (Page 39)
For changing the order of devices in the device overview. (Page 41)
For selecting the commands sending mode IR or RF. (Page 54)
For recording and editing macros. (page 42)
For creating and editing timers. (Page 46)
Getting Started
7. The Mode Menu
DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 20