Charging the RC9500
For charging the RC9500, you use the docking station DS9500.
1 Connect the power adapter to the docking station and plug it
into a wall outlet.
Note Use only the supplied power adapter with the docking station.
2 Slide the RC9500 into the docking station until it clicks.
Charging starts immediately. The blue charging LEDs on the
front of the docking station indicate charging takes place.
When the RC9500 is fully charged,
the LEDs are turned off.
Make sure you lift
the RC9500 up at
an angle of 30° to 45°
when you take the RC9500 out from the docking station.
Note Normal charging time is 2 to 3 hours, depending on the
condition of the battery pack.
You can operate the RC9500 while it is being charged.
The battery pack does not have to be entirely empty before
recharging.
You can place the RC9500 in the docking station at any time.
When the battery is running low, the Low Battery
icon appears.
Recharge the RC9500 as soon as possible to
ensure the perfect performance.
Note The RC9500 retains all settings when the battery is completely
empty. You will only have to adjust the clock.
User Guide
5
Introduction
30° to 45°
Low Battery icon
DS9500
DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 9